Here you can use five buttons to automatically approach the four corners and the center of the print bed with the nozzle. In the menu of the 3D printer, there is a submenu for leveling. Such residues lead to errors in the leveling, which in turn can lead to various printing errors. The leveling of the print bed and the Longer LK5 Pro is done in four steps:īefore you can perform the actual manual leveling of the print bed using the paper method, you have to ensure that both the print bed and the nozzle are free of filament residues. If it is set to the wrong value for your power supply, you will destroy the printer the first time you turn it on! Print Bed Leveling | Longer LK5 Pro IMPORTANT: As with many other 3D printers sold internationally, the Longer LK5 Pro has a switch to adjust the input voltage. When placing the paper clips, make sure that you leave some space at the front left corner, as the nozzle moves along there every time you start a print and can otherwise collide. This is simply placed on the print bed base and fixed with paper clips. Mount the glass plate: The print bed of the LK5 Pro is a glass plate.So it is pretty much impossible that you can plug something wrong here. All cables are connected with letters and the corresponding plugs also. Connect the cables: There is a table in the Quick Start Guide that explains the names of the cables.Mount filament holder and touch screen: This is probably the easiest step of all.You can do this with the help of the nuts on the rotating rods. Make sure that you set a 90° angle between the base and the frame. The support rods can be easily attached to the 3D printer with the included screws. This elegant design makes the 3D printer much more stable with less material. In principle, this is also the secret of the good ratio of size and price of this 3D printer. Mount the support rods: The two support rods stabilize the frame.To remedy this, there are the support rods. The bigger the frame is, the more leverage there is at the end of the frame and harmful vibrations or other disturbances can occur. After that you will notice that the frame is not really stable yet. Connect the frame to the base: You can now screw the frame with assembled X- and Z-axis to the pre-assembled base.Mount the stepper motor at the bottom of the frame and turn the screw rod from the top through the thread provided for the X-axis and connect it to the stepper motor. Assemble the Z-axis: The Z-axis basically consists of the frame itself, the screw rod and the stepper motor.Pay attention to the correct orientation. You only have to push the X-axis onto the frame. The extruder with filament sensor and the hotend are already assembled and connected to the X-axis. Mount the X-axis on the frame: The 3D printer is delivered partially pre-assembled.Therefore, the individual steps are listed here again in detail: Sometimes, however, the descriptions are formulated a bit awkwardly. The instructions consist mainly of easy-to-understand pictograms, pictures and descriptions that explain the assembly step by step. The assembly of the Longer LK5 Pro is not very complicated thanks to the included instructions (“ Quick Start Guide“) and is done within a manageable time. The scope of delivery includes the partially pre-assembled 3D printer, all necessary tools and screws, and a micro SD card with test objects, the Longer 3D Slicer and instructions. An accidental drop should not be a problem. The packaging of the individual parts makes a good impression. The Longer LK5 Pro is delivered in a compact package well secured by foam. 4.3 Insert micro SD card into the 3D printer.4.2 3D object slicing and saving as G-code.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |